Results: Since there is no Canadian Drinking Water Guideline for Ammonia you will compare results to the European Union limit. The standard should give a result very close to the 0.5 mg/L colour; if the colour is darker then it DOES NOT meet the guidelines.
To allow students to run tests on five different sources of water. Students are expected to collect three samples of water: Urban and Rural (includes Aboriginal and non-Aboriginal communities) treated waters, and a Raw Source Water.
1. One bottle contains 5 micrograms/L arsenic. Put 100 mL of water sample in the second plastic bottle with lid (not the flip top type). Water should be room temperature (20-25 degrees C).
Students enter their results for the tests: alkalinity, ammonia, colour, copper, pH, sulphate, total chlorine, and total hardness. Students compare their results to the Guidelines for Canadian Drinking Water Quality.
Learn how to use the Lawnful 17 in 1 Drinking Water Test - Reagent Strips for Water and the Lawnful Bacteria Test for Water. You will be able to test for pH, hardness, hydrogen sulfide, iron, copper, lead, manganese, total chlorine, free chlorine, nitrate, nitrite, sulfate, zinc, fluoride, sodium chloride, total alkalinity, and bacteria (E. Coli/Water Contamination).
Studies have shown that when total chlorine levels drop below recommendations, several water quality problems can occur. With regard to public health, bacteria and selected viruses, called bacteriophages, are able to multiply in water that is not properly disinfected and, depending on the species, could potentially cause waterborne illnesses
Simplified instructions, with information about why each component is important, and QR codes for all the PowerPoint instructions and videos - so your students can scan the QR codes with their smartphones! You might want to print this document double-sided, then you just have one sheet for each test!
Learn how to use the Lawnful 17 in 1 Drinking Water Test - Reagent Strips for Water and the Lawnful Bacteria Test for Water. You will be able to test for pH, hardness, hydrogen sulfide, iron, copper, lead, manganese, total chlorine, free chlorine, nitrate, nitrite, sulfate, zinc, fluoride, sodium chloride, total alkalinity, and bacteria (E. Coli/Water Contamination).
